Description:

Specification:

Thermal Imager detector features:

• Lens: 50mm
• Type: uncooled Focal Plane Array(FPA). v     
• Detector material: Vanadium Oxide micro bolometer
• Picture resolution:320x240
• Detection range:
  780 m  for human detection
  2.2 km for object detection
• Spectral response: 7.5 to 13.5 μm
• Thermal sensitivity: 85mk at F1.6
• Temperature range: -80 - +500 centigrade
• Features: White hot, black hot and false color

Camera Parameter:

• Sensor: 1/4 inch SONY Exview HAD CCD
• S/N Ratio: >50 dB
• Effective Pixel: 752H×582V
• Shutter Speed: 1/2～1/10,000s
• Minimum illumination: 0.01Lux
• Sync system: Inner/Outer Sync
• Signal Output: 1.0Vp-p/75 ohm
• Iris Control:  Auto/Manual first
• White balance: Manual/Auto
• Focus Control:  Manual/Auto
• Scanning system: 15.625KHz(H)  50Hz(V)
• Zoom: 36X  f＝3.4 - 122.4mm
• Support PAL/NTSC
• Horizontal pixel: 540TV Lines

Mechanical structure:

• Al-alloy housing
• High strength optical window uses toughened coated glass, of 5mm thickness.

Electrical features:

• Voltage Input: 18VAV--24VAC/18VDC—24VDC
• Working temperature: -40 - +55 centigrade
• Power consumption: 60W

Features:

Unique Features:

• The ball is made from aluminum alloy (thick: 5mm -15mm),  firm and airproof
• Flat designed optical lens (5mm tempered glass) can maximumly prevent distorted images and protect the built-in integrated camera.
• 360 degree continuous pan rotation, 125 degree tilt rotation

Integrated structure:

• Built-in high resolution 36x integrated camera
• Built-in high performance FLIR thermal infrared imager
• Built-in wiper
• Built-in heater
• Built-in defroster

Pan/Tilt Features: 

• Stepper motor with gearbox, can steadily rotate, accurately locate as well as agilely response
• Manual control speed for pan: 0.1 - 90  degree/s  
• Manual control speed for tilt: 0.1 - 40 degree/s
• Preset target speed : 90 centigrade/s for pan; 40 degree/s for tilt
• Variable Pan auto scan speed : 1 - 40 degree/s can be set 
• Variable Apple peel scan speed: 1 - 40 degree/sec for pan; 1 - 20 degree/sec for tilt

Camera Features:

• Built-in high-resolution and high-zoom integrated camera
• Backlight compensation function
• Color image and Black&White image can be set
• WDR
• Video Stabilizer function
• Privacy Zone Masking Function, up to 24 privacy zones.
• High-speed preset video freeze function

Built-in Decoder Features:

• Integrated multi decoder controller： PELCO P/D protocols
• Can make soft address and hard address setting
• Chinese/English OSD menu to set the camera and pan tilt function
• Environment checking function, check the inside temperature real time;
• Will automatically open the fans once the inside temperature exceed the setting limit value.
• Powering on self-restoring function: users can assign the camera movement after powering on.
• Change speed proportionally function: Pan/tilt speed and the depth of zoom lens decline proportionally and continuously
• The Pan/tilt orientation displays and camera zoom displays variably. Data feedbacks the PTZ orientation.
• With pan auto scan function, the pitching angle can be set
• Virtual home position can be set
• With apply peel scan function
• 2 pattern function
• 4 presets tour function, dwell time can be set
• 255 preset positions with precision error less than ± 0.10
• 5 channels fixed time auto activate function, to run the preset movements
• 3 modes to control the wiper function
• Camera orientation display function（N,NE,E,SE,S,SW,W,NW total 8 orientations）
• 2 alarms input, 1 AUX output

OSD Menu Features:

• Built-in Chinese/English menu, easy to switch menu between 2 languages
• With OSD passport protect function
• Support Chinese/English input, can edit title of the user name, camera position and preset position
• Can set, run, clear presets, preset tours, privacy zone by menu
• Inside temperature and pan tilt orientation information display

Protect Features：

• Embed in surge and lightning protector
• Meeting IP66 standards

Function Explanation:

• Screen menu function (OSD)
   It has screen menu function. All information of camera and pan& tilt can be displayed by menu and to set the function and parameter
• Multi-camera control function
      Select different camera only by mending dial switch setting, no any hardware or software needed. It supports SONY, HITACHI cameras and so on.
• Proportional pan
        Horizontal and tilt speed change automatically with the zoom changes. When zooming wide, the camera speeds down; then zooming narrow, the camera speeds up to catch better tracing effect.
• Auto scan
   Auto scan refers to the function of 3600 continuous scan the images at certain speed on the horizontal lever when keeping the pitching angle unchanged. The left and right limits can be set for continuous scan at certain speed on the horizontal lever.
• Auto flip
  When the camera tilts downward and goes just beyond the vertical poison, the dome rotates 180°. When the dome rotates, the camera starts moving upward as you continue to hold the joystick in the down position. Once you let go of the joystick after the dome rotates, joystick control returns to normal operation. The auto flip function is useful for following a person who passes directly beneath the camera.
• Preset
    Any position of dome camera PTZ can be conserved. We call it preset (pre-established position). The preset can be transferred and cleaned.
• Preset tour
       The dome camera will transfer pre- established preset 1-8 every 10 second. It will leap over to next preset position if position in not among 1-8.
• Pattern
      The PTZ orientation move track of the camera can be stored, we call it pattern. The pan& tilt’s UP, DOWN, LEFT, RIGHT and the lens’ FAR, NEAR can be stored. Also we can call the presetting. This function can be used to record and simulate the operator’s operation process.
• Zero test
    The camera will turn to horizontal and tilt zero by preset 34 when the inevitable desynchronizing appears or the operator wants to find zero position during working process. It can reset the orientation and is convenient for operator
• Low pharosage (colors/ black& white swift) function
   The camera automatically changes CCD pharosage according to surrounding light. Color image changes to black& white one in low pharosage; black& white image changes to color one in high pharosage.(related to camera)
• Auto focus
       The camera automatically adjusts lens focus to keep clear image if auto focus mode. Manually operate FAR or NEAR focus adjustment can also adjust focus. The dome camera will recover auto focus adjustment function if operate horizontal, vertical rotation or control lens zoom.
• Auto iris function
    The camera automatically adjusts iris to keep normal brightness in auto iris mode. Manually operate OPEN or CLIOSE iris adjustment button can also adjust iris. The dome camera will recover auto adjustment function if operate horizontal, vertical rotation or control lens zoom.
• Backlight compensation
    The object will become black as the shadow if strong light appears in background. Backlight compensation function can compensate the brightness automatically to dark objects in bright light background and adjust the brightness background to avoid the image full of brightness and get clear image. Too strong backlight can make the object illegibility.
• WDR (Wide Dynamic Range)
          If there is quite dark and quite bright in the image, WDR can make the darkest and brightest balance to keep clear image
• Privacy Zone
          Be sure protected zone be blocked when using the speed dome camera. The covered image moves with the rotation of pan/tilt and varies with zoom, to keep the privacy zone covered.

Item Includes:

• 1 x Integrated Thermal PTZ Camera
  
• 1 x Power supply box
• 1 x Camera body   　        
• 1 x Connecting cable         
• 1 x Manual 　　　　　       　　　　　    　　　　   
• 1 x Glove                      
• 4 x M8×35 hexagonal Screw                    
• 1 x Nut cap spanner